How to Fix the Encryption Unsuccessful Error in MTK Android Phone

In this article you will learn how to Fix the Encryption Unsuccessful Error in MTK Android Phones like Tecno, Gionee, Infinix, Opsson, Innjoo etc

Contents

    If you boot your MTK Android (e.g Tecno, Gionee, Infinix, Opsson, Innjoo etc) phone and see:

    encryption unsuccessful error mtk android-phone

    Encryption Unsuccessful Error

    Encryption was interrupted and can’t complete. As a result, the data on your phone is no longer accessible.
    To resume using your phone, you must perform a factory reset. When you set up your phone after the reset, you’ll have an opportunity to restore any data that was backed up to your Google account “

    Then your /data or /SD card partitions might be corrupted . To resolve this issue, click the “Reset phone” button at the bottom of the message or boot into recovery mode (see Boot into Recovery Mode ) and select the Wipe data / Factory reset option. You could also wipe cache partition for good measure. If the issue persists then format the SD memory card, slot it back in then reboot the phone .

    * Note: If you encounter the mount /data error then read http://bit.ly/2aDf6dm

    If a factory reset in recovery mode fails to fix it, boot into factory mode (volume down + power button). It’ll display in Chinese. Select the option which has “eMMC” in its name and wait for it to complete then reboot the phone.
    mbtTOC();

    Continue Reading

    How to Easily Remove / bypass Factory Reset Protection on (MTK) Tecno Devices

    In this article you will learn  how to easily remove/bypass  factory reset protection on (MTK) Tecno Phones.

    Contents

      Factory reset protection(FRP) becomes frustrating when you dont know the account that was previously synchronized with the device.

      To save you all this stress whenever you want to do a factory reset

       Navigate to Settings > Accounts and delete / sign out of the Google account associated with the device

      factory reset

       Factory Reset Protection on (MTK) Tecno devices 

      The methods below will show you how to easily remove/bypass this factory reset protection on (MTK) Tecno devices.
      Method 1: Setup selection
       During setup (using the setup wizard), do not connect to a Wi-Fi network. Also, untick “Protect this device

      Method 2: For this method, All you need is just a Miracle Box and MTK 65xx drivers

      Download Miracle Box v2.27 from here
      Download and install MTK 65xx drivers from here

      Procedure
       Launch Miracle Box
       Under MTK tab click Unlock/Fix
       Click Clear Settings/Frp
       Click Start button
       When the backup flash pop up appears, SelectNO
       Connect the device to PC
       Miracle Box will detect the device and start the process
       When you see Done!, the process is complete
       Disconnect and reboot phone

       First boot after this process takes a bit longer than normal, so be patient and wait for it to boot completely.

      mbtTOC();

      Continue Reading

      How to remove / bypass Factory Reset Protection (FRP) on an MTK phone

      In this article you will learn how to remove / bypass Factory Reset Protection (FRP) on an MTK phones in three methods

      Contents

        Before Android 5.0 (Lollipop), doing a factory reset on your Android phone would restore it to its original state like it was brand new. From Lollipop, doing a factory reset in recovery (when the device is still associated with a Google account) still requires that you supply the credentials of the Google account associated with the device before the factory reset was done. This is called Factory Reset Protection (FRP), a security / anti-theft feature.
        If you find yourself locked out of your phone after a factory reset then this guide will come in handy.
        How to remove / bypass Factory Reset Protection (FRP) on an MTK phone

        How to remove / bypass Factory Reset Protection (FRP) on an MTK phone

        Method 1: Setup selection

        During setup (using the setup wizard), do not connect to a Wi-Fi network. Also, untick “Protect this device”

        Method 2: Using SP Flash tool

        * Stock ROM (Firmware)
        * SP Flash Tool ( download-sp-flash-tools-latest-version )
        * PC
        * USB cord
        * Manually Install Mediatek VCOM drivers (seehttp://bit.ly/29Qnunr )

         * Download the firmware for your phone model @http://bit.ly/2aCG857 or http://bit.ly/2aECKDi
        * Using the SP Flash tool guide @http://bit.ly/2a2pJB4, flash by selecting the Firmware Upgrade option

        Method 3: Miracle Box method

        * Download Miracle Box @http://bit.ly/2aEBqR9 and launch
        * Click on the phone type at the top (Samsung, MTK etc)
        * Connect the phone via USB and select SCAN, the phone should get detected
        * Set Mode to Download and click GO
        * Wait for some details to appear at the left side
        * Tick Reset FRP and click Start Button

        How do I avoid the stress of factory reset protection when I need to do a factory reset

        Navigate to Settings > Accounts and delete / sign out of the Google account associated with the device

        mbtTOC();

        Continue Reading

        How to Factory Reset/Hard Reset Your Infinix Phone

        How to Factory Reset Your Infinix Smartphone – There are many reasons why you may wish to hard reset Infinix Smartphone. they include:

        1. When you forget your security lock
        2. To gain new look like those of new phones
        3. When your apps begins to hang so bad
        4. When your internal memory becomes full

        How to Factory Reset Your Infinix Phone



        How to Factory Reset/Hard Rest Your Infinix Phone

        To properly do this follow this steps below


        1. Press and hold the power button at the same time with volume down button. Release immediately when it shows Infinix logo.


        2. You should now see a dead Android logo. 

        3. Press POWER BUTTON and VOLUME UP only ONCE to enter system recovery option.

        4. For Kitkat, Use the volume down to move up and down around the system recovery. (For Lollipop, use volume up and down button to navigate, the power button to make selection)

        5. Now, use volume up button to select “Wipe data/ factory reset”

        6. Select “Wipe data/factory reset

        7. Scroll to choose YES to confirm hard reset

        Wait until data wipe is complete. Now choose Reboot system now.

        Your device has successfully been restored to default settings.

        NOTE: If your get stuck on the Factory reset protection Screen (FRP) use How To Bypass/Remove Factory Reset Protection On Infinix phone to get out of it.



        Thats All On How to Factory Reset/Hard Rest Your Infinix Smartphone….Cheers
        Continue Reading

        How To Bypass/Remove Factory Reset Protection On (MTK) Infinix Phones

        How To Bypass/Remove Factory Reset Protection On (MTK) Infinix Phones – Factory reset protection(FRP) becomes frustrating when you dont know the account that was previously synchronized with the device.


        To save you all this stress whenever you want to do a factory reset
        Navigate to Settings > Accounts and delete / sign out of the Google account associated with the device

        How to bypass factory reset protection frp on mtk Infinix phones

        The Procedures below will show you how to easily remove/bypass this factory reset protection on (MTK) Infinix Phones.

        Procedure 1: Setup selection
        During setup (using the setup wizard), do not connect to a Wi-Fi network. Also, untick “Protect this device

        Procedure 2: For this method, All you need is just a Miracle Box and MTK 65xx drivers


        Download Miracle Box v2.27 from here
        Download and install MTK 65xx drivers from here

        Steps To Follow When Using the Miracle Box To Remove FRP on Infinix Devices

        Launch Miracle Box
        Under MTK tab click Unlock/Fix
        Click Clear Settings/Frp
        Click Start button
        When the backup flash pop up appears, SelectNO
        Connect the device to PC
        Miracle Box will detect the device and start the process
        When you see Done!, the process is complete
        Disconnect and reboot phone

        First boot after this process takes a bit longer than normal, so be patient and wait for it to boot completely.




        Procedure 3.
        This method requires upgrading your device using the so flash tool, so download the stock firmware for your particular phone model here –>All Infinix stock Roms/Fimwares
        Download sp flash tool here –>Sp flash tool latest versions
         See full procedure on how to Flash / upgrade using the sp flash tool here –>How to Flash your Infinix device using the sp flash tool
        Note: Ensure you select the (firmware upgrade Uption) before flashing, see image below

        How to bypass frp on mtk Infinix phones

        Thats all on How To Bypass/Remove Factory Reset Protection On (MTK) Infinix Phones …Stay tuned

        Continue Reading

        How to Identify a fake Tecno phone

        Sadly for us Tecno users, you and I know that our market has been filtered by fake vendors who are selling us clones (copies of phones). They look exactly like our phones but are very fake.

        They perform poorly, wear out fast, are not guaranteed by Tecno, they are not worth what you pay for them and they will never serve you.

        (adsbygoogle = window.adsbygoogle || []).push({});

        ARE YOU USING A FAKE TECNO PHONE?

        Well we good news for everybody, you can now know if your phone is fake. So, before you pay for your new phone, you are advised to use our FAKE PHONE DETECTOR, it’s actually a new tool by tecno to stop the sale of fake phones to it consumer’s



        See Also: How to Know A Fake Infinix Phone And Battery

        To check if you are using an original or fake Tecno phone CLICK HERE and you will be taken to Tecno’s phone checking center. 

        All you need do is provide the [first] IMEI on your Tecno phone. If asked for the VC (e.g. for C9 and C7 users), open the back of your phone and you will find it written on the battery cover. Then hit submit.

        If the phone is genuine, it will say, “Welcome to use original Tecno Phone.” If it is fake, you will be told (not sure what it says as mine proved genuine).

        Below there, you can check if your battery is genuine by keying in your serial number (SN) found in the “About Phone” section in your device.

        Stay safe. Check this before you leave any vendor’s shop. Buy genuine Tecno!

        TECNO CARES

        Continue Reading

        How To Protect Your Data On The HIOS (Camon C7, C9)

        We all have that documents that we want to keep from the very eyes of everyone (Privacy)… Tecno has brought us a different level of protection with a data protection feature on your HIOS…The redefined HIOS on Camon C7,C9 probably J8 give user an opportunity to hide some selected documents (Music,Videos,Pictures,PDF and Doc) with a password, pattern or pin…with this short tutorial I will show you this hidden potential of your HIOS devices…

        Step A

        Open your the app drawer of your phone and click on Setting and stroll down to security

        How to protect data in hios camon c7and c9

        STEP B

         Click on data protection under device Administration

        STEP C 

        Choose the best security option for you (Pin,Password, Pattern) I Chose pattern..draw your preferred pattern..

        and continue….

        STEP C

         Click on the add (+) button at the top right end of the screen to add your documents

        STEP D

        Chose your default file location I Choose SD Card..

        STEP E 

        Scroll to your preferred file folder

        STEP F 

        Select files you which to protect (You can mark)

        Now click on the lock icon at the top right corner

        Swipe your notification bar down to check locking progress

        To Unlock files click on more option and edit select files you want to unlock and click open lock open icon

        Swipe down to watch progress unlocking Completed

        Continue Reading

        How To Bypass/Remove Factory Reset Protection On (MTK) Tecno Devices

        Factory reset protection(FRP) Tecno Phones becomes frustrating when you do not know the account that was previously synchronized with the device.

        To save you all this stress whenever you want to do a factory reset

        Navigate to Settings > Accounts and delete / sign out of the Google account associated with the device

        How to bypass factory reset protection frp on mtk tecno phone

        The methods below will show you how to easily remove/bypass this factory reset protection on (MTK) Tecno devices.

        Method 1: Setup selection
        During setup (using the setup wizard), do not connect to a Wi-Fi network. Also, untick “Protect this device

        Method 2: For this method, All you need is just a Miracle Box and MTK 65xx drivers


        Download Miracle Box v2.27 from here
        Download and install MTK 65xx drivers from here


        Procedure
        Launch Miracle Box
        Under MTK tab click Unlock/Fix
        Click Clear Settings/FRP
        Click Start button
        When the backup flash pop up appears, Select NO
        Connect the device to PC
        Miracle Box will detect the device and start the process
        When you see Done!, the process is complete
        Disconnect and reboot phone

        First boot after this process takes a bit longer than normal, so be patient and wait for it to boot completely.

        Check out these Phones From the (Y) series



        Method 3.

        This method requires upgrading your device using the so flash tool, so download the stock firmware for your particular phone model here –>All Tecno stock fimwares
        Download sp flash tool here –>Sp flash tool latest versions
         See full procedure on how to upgrade using the sp flash tool here –>How to upgrade a device using the sp flash tool
        Note: Ensure you select the (firmware upgrade Uption) before flashing, see image below 
        How to bypass frp on mtk tecno phones
        Continue Reading

        Reasons why you must use an original phone charger

        As you all know, phone warranties do not cover accessories such as earphones, USB cables, covers and batteries. This is because the mode of use by the purchaser can destroy them. Today, let me tell you about your most important accessory: the charger, plus why you must always use the original [Branded] charger.

        But, first, let me tell you that there are already tens of cases of people who have been burned, hurt, and killed by phone chargers. Cases of house fires started by the same are also on the increase.

        The following information will save your health, life, house and phone:

        reasons to use original phone charger


        Charger/Battery Power Rating

        If you ever used a charger that takes too long to fill your battery or one that charges very fast, you might be using the wrong charger. This might spoil your battery, burn the charger or overheat and cause a fire.


        When you buy a charger, check that it is rated exactly or slightly above the Voltage of your battery. In short, if your battery is rated 4.0 volts, find a charger that is rated 4V or 4.2V.
        Secondly, check the output Amperage (mA). If your cell is rated 1,000mA, use a charger that is exact or above that rating. If you use one that is 900mA, the battery will only fill up to the 900mA and stop. That leads to overheating, slow charging and device failure.
        Finally, check the recommended output (Volts). If say, your country’s household voltage is 100-240Volts, buy a charger that is rated WITHIN this range. If you buy a charger with a rating of 50-200Volts, it will burn up immediately you plug it in.

        To save you this stress, just purchase an original charger!

        USB charge vs. Wall charge
        As you have seen with modern chargers, they come combined with a USB and charger. At times, you may lose the cable and have to borrow one. When you do, you might realize that your phone charges slowly and also discharges very fast.
        The problem is that we have USB 1.0, USB 2.0 and now USB 3.0 cables. The 1.0, 2.0 and 3.0 cables utilize 500mA, 900mA and 1500mA respectively. Therefore, if your cable was USB 3.0 and you start using a 2.0, then you will have to charge longer and your phone might never get charged fully. Similarly, if you had a 1.0 and start using the 3.0, you risk spoiling your battery by exceeding its rating.

        To save you this stress, just purchase an original charger!!

        Certification
        When you buy a Tecno charger, just know that is usually tested and certified by bodies such as MFI, RHOS and CE. Check and see. Your Tecno charger is branded with CE on one side.
        If you buy an uncertified charger, you risk having loose wires, poor quality components, no fuse, no regulator, poor transformer plus many other dangerous faults. These can cause your battery to spoil, burn or explode. They can even damage your phone! However, when you purchase an original charger, you are rest assured that the quality is right and you live in no danger.

        To save you this stress, just purchase an original charger!!!

        To be safe:

        • Use the original charger that you bought with your gadget. 
        • If it spoils or get lost, buy an original one from a branded seller. 
        • Check your cell ratings before borrowing a charger from someone. 
        • Carry your USB/charger whenever you can. That is what works best for your cellphone. 
        • Realize that cheap chargers mean they are missing something like certification. Do not buy cheap, unbranded chargers! 
        • If you purchase an unoriginal charger, make sure all its rating match those of your original charger. 

        Bonus Tip:

        Some people say that if you charge your phone too long after it hits 100%, it will spoil. The truth is that it cannot spoil it! Our modern phones are so intelligent that they stop taking power when they get fully charged.
        As such, there is no harm. However, your charger’s life might reduce since it remains plugged in and all its components are working.
        Therefore, be a good owner: Unplug your charger from the power socket when it’s not in use. That guy wants to rest as well, OK? 
        please share this yo help others out there, we entertain comments too.
        Continue Reading