How To Root Tecno Camon CX – Very Simple

How To Root Tecno Camon CX – The Tecno Camon CX and Camon CX Air are currently the Latest and Hottest Tecno phones at the moment. This rooting guide is only for the Camon CX (CX-H501D1-N-170405V107) which is an MT6755 powered phone by Tecno running on Android 7 (Nougat), that of the Camon CX Air will be available on our next post, Stay tuned.

How To Root Tecno Camon CX - Very Simple

How can I root my Tecno Camon CX?

Tor root your Camon CX There are three main steps involved:

  1. Unlocking the Bootloader of the Tecno Camon CX
  2. Flashing the Hovatek TWRP / Philz recovery.img and SuperSU.zip
  3. And Lastly: confirming Root by installing and running Root Checker


Procedure

  • Download either of the two custom recoveries below TWRP or Philz : 
  • TWRP for Tecno Camon CX ported by Team Hovatek See Here
  • Philz for Tecno Camon CX ported by Team Hovatek See Here
  • Setup ADB and Fastboot on the PC using the guide at See Here
  • Extract and copy the TWRP / Philz recovery.img into the same folder as the fastboot.exe and adb.exe 
  • Follow this guide to Unlock the Bootloader of the Tecno Camon CX See Here 
  • Now Download SuperSU 2.76.zip See Here
  • Copy SuperSU.zip to both the Internal and External SD cards 
  • Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide; don’t forget to re-enable OEM unlocking and USB Debugging) 
  • When the phone enters Fastboot, load the TWRP / Philz recovery to the phone by typing the command below then pressing Enter 

Code:
fastboot boot recovery.img 

  • The phone should automatically boot into TWRP / Philz recovery mode (depending on which you flashed) 
  • Do a full backup by tapping Backup (Recommended) then proceed 
  • In TWRP / Philz if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY 
  • If TWRP / Philz offers to root the phone, select NO 
  • In TWRP / Philz recovery, tap Install 
  • Navigate to the location of the SuperSU.zip on External SD card and select it 
  • Swipe to confirm flashing of SuperSU.zip (if prompted) and wait till flashing is complete 
  • Reboot the phone normally 
  • Lastly you need to Confirm Root access on the Tecno Camon CX by installing and running Root Checker.
Source: Hovatek
    Continue Reading

    How To Root Tecno Camon C9 Pro – Easy Guide

    How To Root Tecno Camon C9 Pro – The Tecno Camon C9 Pro is an upgrade to the Tecno Camon C9 to an awesome 3GB RAM and 32GB ROM. Below is an easy guide on how to root the Tecno Camon C9 Pro.

    How To Root Tecno Camon C9 Pro - Easy Guide

    How can I root my Tecno Camon C9 Pro?

    Requirements
    You will need Absolute patience in following the steps involved in this guide
    *. Setup ADB and Fastboot on the PC using the guide ( See Here )
    *. Flashing the Hovatek Philz recovery.img (download here)
    *. For the SuperSU2.76.zip (download it here)
    *. Unlocking the boot-loader of Tecno Camon C9 Pro

    1. Copy/ transfer Copy SuperSU.zip to the phone’s SD card (Its important you insert an SD card)
    2. Now you will have to Extract and copy the Hovatek Philz recovery.img into the same folder as the fastboot.exe and adb.exe
    3. Follow the steps in the link provided below to Unlock Tecno Camon C9 Pro bootloader (see Here)
    4.next is to Connect the phone to your PC with the help of your USB cord while your phone is switched ON and boot it into Fastboot (as instructed in the Bootloader unlock guide)
    5. The moment your device enters fast boot, flash the recovery.img to the phone by typing the command below then pressing Enter
    fastboot flash recovery recovery.img
    6. Reboot the phone by typing the command below then pressing Enter
    fastboot reboot
    6. Once recovery is flashed in fastboot, hold the Volume up + Power button and don’t release till the phone reboots. When it does, select Recovery from the list to proceed to recovery mode
    8. In Philz recovery, you use the Volume buttons to navigate and Power button to select
    9. Select Install Zip
    10. Now navigate to the location of the SuperSU2.76.zip on the SD Card and select it
    11. Wait till flashing is complete
    12. If android promts you to fix root, select No
    13. Reboot the phone normally
    14. Finaly confirm Root access on your Tecno Camon C9 Pro by installing and running Root Checker

    Source

      Continue Reading

      How to Root Tecno L9 Plus – Step by Step

      To successfully root your Tecno L9 plus, you have to follow these steps below. We have made it very easy for you with numbered procedures. Good luck.
      About Tecno L9 Plus
      The Tecno L9 Plus (e.g L9Plus-H8011A1-N-170210V206) is an MT6580 powered phone running on Android 7 (Nougat)

      How to Root the Tecno L9 Plus - Step by Step

      How to root the Tecno L9 Plus

      1. First and foremost you have to Dump your firmware in scatter format using Miracle Box  See Here

      2. Now Download SuperSU 2.78 See Here when done save to both phone storage and SD card

      3. Next is to Create a new folder on your PC, name it PhoneMobs

      4. Copy preloader.bin from your Miracle Box backup into the PhoneMobs folder

      5. We are almost there : Download Philz for Tecno L9 Plus ported by Team Hovatek From Here

      6. Copy the Philz recovery.bin and scatter file from the Philz zip file downloaded above into the PhoneMobs folder, making peloader.bin, scatter file and recovery.bin (Philz) in the folder

      7. Flash the preloader.bin and recovery.bin using Miracle Box See Here

      8. Boot the phone into recovery mode  after flashing See How

      9. In Philz recovery Menu, you use the Volume buttons to navigate and Power button to select

      10. Select Install Zip

      11. Navigate to the location of the SuperSU2.78.zip on the SD Card and select it

      12. Wait till flashing is complete

      13. If you are prompted to fix root, select No

      14. Reboot the phone normally

      15. Lastly: Confirm Root by installing and running Root Checker APK

      Tutorial by Hovatek
      Continue Reading

      How To Root Tecno W3 LTE In Quick Steps

      To successfully root your Tecno W3 LTE, follow these steps below. We have made it very easy for you to understand with numbered procedures. Good luck.
      About Tecno W3 LTE
      The Tecno W3 LTE (e.g W3LTE-H356D1-M-160908V43) is a 4G variant of the Tecno W3. Its an MT6735 powered phone running on Android 6.0 (Marshmallow)

      How To Root Tecno W3 LTE In Quick Steps

      How to root the Tecno W3 LTE

      1. First and foremost you have to Dump your firmware in scatter format using Miracle Box  See Here

      2. Now Download SuperSU 2.78 See Here when done save to both phone storage and SD card

      3. Next is to Create a new folder on your PC, name it TecMobs

      4. Copy preloader.bin from your Miracle Box backup into the TecMobs folder

      5. We are almost there :

      • TWRP for W3LTE-H356-D1-M-160908V43 @ See Here
      • TWRP for W3LTE-H356-D1-M-HIOS-20160705 @ See Here
      • TWRP for W3 LTE-H356-D1-M-HIOS-20160619 @ See Here

      6. Copy the TWRP recovery.bin and scatter file from the TWRP zip file downloaded above into the TecMobs folder, making peloader.bin, scatter file and recovery.bin (Philz) in the folder

      7. Flash the preloader.bin and recovery.bin using Miracle Box See Here

      8. Boot the phone into recovery mode  after flashing See How

      9. In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, tap KEEP READ ONLY

      10. Select Install Zip

      11. Navigate to the location of the SuperSU2.78.zip on the SD Card and select it

      12. Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete

      13. If you are prompted to fix root, select No

      14. Reboot the phone normally

      15. Lastly: Confirm Root by installing and running Root Checker APK

      Tutorial by Hovatek

      Continue Reading

      How To Root Tecno W5 Lite Step by Step

      How to Root Tecno W5 Lite – Good news for the Tecno W5 Lite owners as you can now root your tecno W5 Lite device via Philz Recovery: More details below:

      For The Tecno W5 users, see rooting procedure Here

      Teno W5 Lite has Mediatek Chipset of MT6580 running on Android 6 (Marshmallow). Below is a step by step guide on how to root your W5 Lite.

      You May Also Like ToDownload Tecno W5 Lite Stock ROM

      Requirements

      • Your Device should have atleast 50% Charge 
      • Download Philz Recovery For Tecno W5 Lite
      • Setup ADB and Fastboot on the PC using the guide at Here
      • Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe 
      • Unlock the Bootloader of the Tecno W5 Lite using the guide at Here
      • Download SuperSU 2.76.zip at Here

      How To Root Tecno W5 Lite 

      1. Now Extract and copy the downloaded Tecno W5 Lite Philz recovery to the ADB folder 
      2. Copy the SuperSU.zip to the SD and Phone Storage of your phone 
      3. Connect the device to your computer via USB while On and boot it into Fastboot (as instructed in the Bootloader unlock guide) 
      4. In Fastboot Mode 
      5. Type this Command Code in ADB 
      6. Fastboot flash recovery.img 
      7. Once the recovery is flashed successfully in Fastboot. 
      8. Now hold the Volume up + Power button Please don’t release till the phone reboots into recovery Mode. 
      9. In the Philz recovery Mode, you will get a prompt asking you to swipe to allow modification of the System partition. You are to Tap KEEP READ ONLY 
      10. The Recovery will offer to root your Tecno W5, select No. 
      11. Click Install on the TWRP recovery 
      12. Navigate to your storage of your device and select the SuperSU2.76.zip and select it 
      13. Confirm the installation by swiping then wait till it complete 
      14. Reboot the phone normally.
      Thats All on how to root Tecno W5 Lite…

      CreditzHovatek

        Continue Reading

        How To Root Tecno Phantom 6 Plus – Step by Step

        How To Root Tecno Phantom 6 Plus – With numbered procedures, we have made it easy for you, all you need is comprehend and follow the steps for a successful root.

        NOTE: The steps below on how to root the phantom 6 Plus has been tested and proven, therefore ensure you follow its strictly for a successful root.

        Please refere to this post on How to Root The Tecno Phantom 6

        How To Root Tecno Phantom 6 Plus

        To Root the Tecno Phantom 6 Plus two steps are involved:

        1.) Unlocking the Bootloader of the Tecno Phantom 6 Plus (A9) – See Here

        2.) Flashing the TWRP recovery.img and SuperSU.zip with the procedures bellow

        Procedures

        • Tecno Phantom 6 Plus (A9) ported by Team Hovatek  download from here 
        • Setup ADB and Fastboot on the PC See Here
        • Now Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe
        • Next is to Unlock the Bootloader of the Tecno Phantom 6 Plus – See Guide
        • Download SuperSU 2.76.zip from here
        • Copy SuperSU.zip to the phone’s internal storage
        • Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide; don’t forget to re-enable OEM unlocking and USB Debugging)
        • On Fastboot mode, load the TWRP recovery to the phone by typing the command below then pressing Enter.

        Command:


        fastboot boot recovery.img

        • The phone should automatically boot into TWRP recovery mode
        • In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap keep read only.
        • If asked to root the phone by TWRP, select NO
        • In TWRP recovery, tap Install
        • Locate the SuperSU2.76.zip location and select it
        • Now Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
        • Reboot the phone normally
        • Confirm Root by installing and running Root Checker from here

        Credits:
        TeamHovatek For Porting TWRP

        Thats all on How To Root Tecno Phantom 6 Plus –  Step by Step hope it helps

        Continue Reading

        How to root the Tecno camon C7 – Step by Step

        How to root the Tecno C7  – Good News to those of us who own the Tecno C7 because the rooting is now available this way you can tweak your phone all you want

        How to root the Tecno Camon C7
        The Tecno Camon C7 (C7-H355A1-M-160705V9 ) is an MT6735 powered phone running on Android 6 (Marshmallow), below are the procedures on how to root the Tecno C7.

        How to root the Tecno Camon C7

        ➮Dump your firmware in scatter format using Miracle Box see Here

        ➮Download SuperSU 2.78 Here and save to both phone storage and SD card

        ➮Create a new folder named Hovatek on your PC

        ➮Copy preloader.bin from your Miracle Box backup into the Hovatek folder

        ➮Download TWRP for Tecno Camon C7 ported by Team Hovatek Here

        ➮Copy the TWRP recovery.bin and scatter file from the TWRP zip file downloaded above into the Hovatek folder, making peloader.bin, scatter file and recovery.bin (TWRP) in the folder

        ➮Flash the preloader.bin and recovery.bin using Miracle Box Here

        ➮Boot the phone into recovery mode (Vol up + Power) after flashing

        See Also:
        How to root Tecno Camon C9 in Steps

        ➮In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, tap KEEP READ ONLY

        ➮In TWRP recovery, tap Install

        ➮Navigate to the location of the SuperSU.zip and select it

        ➮Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete

        ➮Reboot the phone normally

        ➮Confirm Root by installing and running Root Checker Here

        Credits To Hovatek
        Continue Reading

        How to root Tecno W5 – Step by Step

        How do I root a Tecno W5 Android phone? – The Tecno W5 is the lattest addition to the W Series an MT6737M powered Android phone running on Android 6 (Marshmallow), Follow the detailed guide provided bellow to root this awesome device

        (adsbygoogle = window.adsbygoogle || []).push({});

        how to root tecno w5

          How To Root Tecno W5 Android phone?

        • Download TWRP for Tecno W5 ported by Team Hovatek at Here
        • Setup ADB and Fastboot on the PC using the guide at Here
        • Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe 
        • Unlock the Bootloader of the Tecno W5 using the guide at Here
        • Download SuperSU 2.76.zip at Here
        • Copy SuperSU.zip to both the phone’s SD card and internal storage 
        • Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide) 
        • When the phone enters Fastboot, flash the TWRP recovery image to the phone by typing the command below then pressing Enter

        Code:
        fastboot flash recovery recovery.img

        • Once recovery is flashed in fastboot, hold the Volume up + Power button and don’t release till the phone reboots into recovery 
        • In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY 
        • If TWRP offers to root the phone, select NO 
        • In TWRP recovery, tap Install 
        • Navigate to the location of the SuperSU2.76.zip and select it 
        • Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete 
        • Reboot the phone normally 
        • Confirm Root by installing and running Root Checker @ Here
        Source
          Continue Reading

          How to Root Tecno W4 – Very Simple

          How to Root Tecno W4Tecno W4 was the first Tecno phone to ship with Android 6.0 (Marshmallow) out of the box. We’d compared the Tecno W4 to some other Tecno phones on the W series, so head over to Tecno W2 vs Tecno W3 vs Tecno W4 vs Tecno W5 for the comparison. If the latest version of Kingroot doesn’t work for you, follow the step by step guide provided in this post.

          How do I root the Tecno W4?

          How do I root the Tecno W4?

          1.Install VCOM drivers on your PC using Here

          2.Download SuperSU 2.66.zip Here

          3.Copy SuperSU.zip to both the phone’s SD card and internal storage

          4.Download TWRP for Tecno W4  Here

          5.Switch off the phone (still with battery inside)

          Read:
          Full Guide On How To Unbrick a Bricked Tecno W4




          6.Flash the TWRP recovery.img to the phone using SP Flash tool Here

          7.Boot the phone into recovery mode using Volume up button + Power button

          8.In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right

          10.In TWRP recovery, tap Install

          11.Navigate to the location of the SuperSU.zip and select it

          12.Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete

          13.Reboot the phone normally

          14. Finally Confirm Root by installing and running Root Checker Here

          CreditzHovatek

          Continue Reading

          How to root your Tecno W3 – Step by step guide

          How to root your Tecno W3

          Rooting your Tecno W3 will be a very simple thing to do if you follow the step by step guide provided in this post. The Tecno W3  runs on Android 6.0 Marshmallow one of androids latest OS, Rooting the 6.0 marshmallow is not an easy thing to do because of google google latest security upgrades, all thanks to hovatek though for making this possible

          Requirements to root Tecno W3

          ▪Download and install VCOM drivers on your PC see – Here

          ▪A SuperSU.Zip file – Here

          ▪Now

          Download TWRP for Tecno W3 ported by Team Hovatek  See Here

          TWRP for Tecno W3-H806A1-M-161230V103 ported by Team Hovatek  See Here

          TWRP for Tecno W3-H806A1-M-170204V109 ported by Team Hovatek  See Here

          TWRP for Tecno W3-H806A1-M-170222V112 ported by Team Hovatek  See Here

          ▪Download Sp flash tool –Here

          How to Root Tecno W3 

          1. Copy the SuperSU.zip you just downloaded  to both the phone’s SD card and internal storage

          2. Now switch off the phone

          3. Next flash the TWRP recovery.img to the phone using this SP Flash tool guide

          4. Boot the phone into recovery mode using Volume up button + Power button

          5. If you get a prompt asking you to swipe to allow TWRP modify the system partition then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right

          6. In TWRP recovery, tap Install

          7. Navigate to the location of the SuperSU.zip and select it

          8. Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete

          9. Reboot the phone normally

          You can confirm Root access by installing and running Root Checker. That’s all on how to root Tecno W3, I hope it works for you.

          Merry Christmas 
          Continue Reading