Gionee S10B firmware stock ROM and flash file free download with flashing and installation guide.
Gionee S10B Quick Review
Gionee S10B runs on Octa-core (4×1.8 GHz Cortex-A53 & 4×1.0 GHz Cortex-A53) processor and for the display, it has 1080×1920 pixels resolution, while the dimension is 154.5 x 76 x 7.6 mm (6.08 x 2.99 x 0.30 in) and weigh 176 g (6.21 oz).
The device is powered by Android 7 (Nougat), Amigo 4 operating system with Octa-core (4×1.8 GHz Cortex-A53 & 4×1.0 GHz Cortex-A53) processor and Mediatek MT6755 Helio P10 (28 nm) chipset. It possesses and 64GB storage, microSDXC.
The device has Dual lens of 13 MP, PDAF
5 MP, f/2.4, (depth) primary camera with Dual-LED dual-tone flash, HDR, panorama features and for selfie, it has Single lens of 16 MP, f/2.0, 26mm (wide), 1/3.06″, 1.0µm.
It comes with Hybrid Dual SIM (Nano-SIM, dual stand-by), other connectivity and sensors like, microUSB 2.0, Yes, with A-GPS.
This device is powered with a Li-Po 3700 mAh, non-removable battery.
Gionee S10B Stock ROM / Firmware
Gionee stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your phone, you’ll always recover your phone to normal.
Flashing and installing Gionee S10B Official Stock ROM can help you solve many problem with your Gionee smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem.
Download Gionee S10B Flash File
Before you begin flashing your phone, it is important to have all the flash files / tools at hand:
- Install Gionee USB drivers on your computer, Download And Install Gionee USB Drivers
- Download SP Flash Toolfor Windows: Download And Install Sp Flash Tool
- Download & extract WiseLink Tool for Windows: Download WiseLink tool to flash all Mediatek Devices
Download Gionee S10B Firmware
Click the download link below to download the StockROM / Firmware
Device: Gionee S10B
File Name: Gionee_S10B_T2022_MT6755_05052017.zip
File Size: 2 GB
How to Flash or Install Firmware (ROM)
- Download and extract the Gionee S10B stock firmware package on the computer.
- After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on the Computer, and if in case USB Driver is already installed, then SKIP this step.
- Follow the How-to Flash Manual to Flash or install the Firmware on your model Device.
|Real Camera Type||Single Lens|
|Rear Video||[email protected]|
|Rear Features||Dual-LED dual-tone flash, HDR, panorama|
|Selfie Camera Type||Single|
|Selfie Sensor(s)||16 MP, f/2.0, 26mm (wide), 1/3.06″, 1.0µm|
|Storage Capacity||64GB storage, microSDXC|
|RAM (Memory)||4GB RAM|
|Card slot||microSDXC (uses shared SIM slot)|
|SIM||Hybrid Dual SIM (Nano-SIM, dual stand-by)|
|Dimensions||154.5 x 76 x 7.6 mm (6.08 x 2.99 x 0.30 in)|
|Weight||176 g (6.21 oz)|