ZTE Blade X9 firmware stock ROM and flash file free download with flashing and installation guide.
ZTE Blade X9 Quick Review
The phone runs on Android 7.1 (Nougat); nubia UI 5 with IPS LCD capacitive touchscreen, 16M colors, 5.5 inches, 83.4 cm, 155.3 x 77.2 x 8.6 mm (6.11 x 3.04 x 0.34 in) dimension and weigh 160 g (5.64 oz).
The device is powered by Android 7.1 (Nougat); nubia UI 5 operating system with Octa-core 1.4 GHz Cortex-A53 processor and Qualcomm MSM8940 Snapdragon 435 (28 nm) chipset. It possesses 32 GB, 3 GB RAM memory with microSD, up to 128 GB (uses shared SIM slot).
It possesses ; 13 MP, PDAF, f/2.2 primary camera with LED Flash and ; 5 MP, f/2.4 pixel front selfie camera.
This is a Hybrid Dual SIM with other connectivity and sensors like Fingerprint (front-mounted), accelerometer, proximity, USB version microUSB 2.0Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 4.x, A2DP, LE version and Yes, with A-GPS, GLONASS gps
This device is powered with a Non-removable Li-Po 3000 mAh battery.
ZTE Blade X9 Stock ROM / Firmware
ZTE stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your ZTE Blade X9, you’ll always recover your phone to normal.
Flashing and installing ZTE Blade X9 Official Stock ROM can help you solve many problem with your ZTE smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem.
Download Blade X9 Blade X9 Flash File
Before you begin flashing your phone, it is important to have all the flash files / tools at hand:
- Install ZTE USB drivers on your computer, Download And Install ZTE USB Drivers
- Download SP Flash Toolfor Windows: Download And Install Sp Flash Tool
- Download & extract WiseLink Tool for Windows: Download WiseLink tool to flash all Mediatek Devices
Download ZTE Blade X9 Firmware
Click the download link below to download Blade X9 StockROM / Firmware
Device: ZTE Blade X9
Android: Android 7.1 (Nougat); nubia UI 5
File Name: ZTE_Blade_X9_27102015_QFIL.zip
File Size: 849 MB
How to Flash or Install Firmware (ROM)
- Download and extract the ZTE Blade X9 stock firmware package on the computer.
- After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on the Computer, and if in case USB Driver is already installed, then SKIP this step.
- Follow the How-to Flash Manual to Flash or install the Firmware on your Blade X9 Device.
ZTE Blade X9 Key Specs
|3G Network||LTE band 1(2100), 3(1800), 5(850), 7(2600), 38(2600), 39(1900), 40(2300), 41(2500)|
|4G Network||LTE band 1(2100), 3(1800), 5(850), 7(2600), 38(2600), 39(1900), 40(2300), 41(2500)|
|Network||CDMA 800 & TD-SCDMA|
|Technology||GSM / HSPA / LTE|
|2G Network||GSM 850 / 900 / 1800 / 1900 – SIM 1 & SIM 2|
|Status||Available. Released 2015, December|
|Real Camera Type|
|Rear Sensor(s)||13 MP, PDAF, f/2.2|
|Rear Video||[email protected]|
|Rear Features||Quad-LED flash, HDR|
|Selfie Features||5 MP, f/2.4|
|Storage Capacity||32 GB|
|RAM (Memory)||3 GB RAM|
|Card slot||microSD, up to 128 GB (uses shared SIM slot)|
|SIM||Hybrid Dual SIM|
|Dimensions||155.3 x 77.2 x 8.6 mm (6.11 x 3.04 x 0.34 in)|
|Weight||160 g (5.64 oz)|
|WLAN||Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot|
|GPS||Yes, with A-GPS, GLONASS|
|Bluetooth||4.x, A2DP, LE|
|Resolution||720 x 1280 pixels, 16:9 ratio (~267 ppi density)|
|Type||IPS LCD capacitive touchscreen, 16M colors|
|Size||5.5 inches, 83.4 cm|
|Sensors||Fingerprint (front-mounted), accelerometer, proximity|
|CPU||Octa-core 1.4 GHz Cortex-A53|
|OS||Android 7.1 (Nougat); nubia UI 5|
|Chipset||Qualcomm MSM8940 Snapdragon 435 (28 nm)|