ZTE Blade L3 Firmware Stock ROM and Flash File

ZTE Blade L3 firmware stock ROM and flash file free download with flashing and installation guide.

Contentshide

ZTE Blade L3 Quick Review

The phone runs on Android 7.0 (Nougat); MiFavor 4.2 with TFT capacitive touchscreen, 16M colors, 5.2 inches, 74.5 cm (~70.3% screen-to-body ratio), 142.5 x 72.5 x 8.6 mm (5.61 x 2.85 x 0.34 in) dimension and weigh -.

The device is powered by Android 7.0 (Nougat); MiFavor 4.2 operating system with Octa-core 1.4 GHz Cortex-A53 processor and Qualcomm MSM8940 Snapdragon 435 (28 nm) chipset. It possesses 32 GB, 3 GB RAM or 16 GB, 2 GB RAM memory with microSD, up to 256 GB.

It possesses ; 13 MP, AF 2 MP, depth sensor primary camera with LED Flash and ; 13 MP pixel front selfie camera.

This is a Dual SIM with other connectivity and sensors like Fingerprint (front-mounted), accelerometer, gyro, proximity, compass, USB version microUSB 2.0Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot, Bluetooth 4.1, A2DP, LE version and Yes, with A-GPS gps

This device is powered with a Non-removable Li-Ion 2730 mAh battery.

ZTE Blade L3 Stock ROM / Firmware

ZTE stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your ZTE Blade L3, you’ll always recover your phone to normal.

Flashing and installing ZTE Blade L3 Official Stock ROM can help you solve many problem with your ZTE smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem.

Download Blade L3 Blade L3 Flash File

Before you begin flashing your phone, it is important to have all the flash files / tools at hand:

Install ZTE USB drivers on your computer, Download And Install ZTE USB Drivers
Download SP Flash Toolfor Windows: Download And Install Sp Flash Tool
Download & extract WiseLink Tool for Windows: Download WiseLink tool to flash all Mediatek Devices

Download ZTE Blade L3 Firmware

Click the download link below to download Blade L3 StockROM / Firmware

Device: ZTE Blade L3

Model:

Android: Android 7.0 (Nougat); MiFavor 4.2

File Name: ZTE_Blade_L3_V1.0.1_B07_27052016.zip

File Size: 929 MB

Firmware Download Link:

How to Flash or Install Firmware (ROM)

Download and extract the ZTE Blade L3 stock firmware package on the computer.
After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
Install the provided USB Driver on the Computer, and if in case USB Driver is already installed, then SKIP this step.
Follow the How-to Flash Manual to Flash or install the Firmware on your Blade L3 Device.

ZTE Blade L3 Key Specs

Network

3G Network	LTE band 1(2100), 3(1800), 5(850), 7(2600), 8(900), 20(800)
4G Network	LTE band 1(2100), 3(1800), 5(850), 7(2600), 8(900), 20(800)
Network
Speed	HSPA, LTE
Technology	GSM / HSPA
2G Network	GSM 900 / 1800 / 1900 – SIM 1 & SIM 2

Launch

Announced	2015, February
Status	Available. Released 2015, May

Main Camera

Real Camera Type
Rear Sensor(s)	13 MP, AF 2 MP, depth sensor
Rear Video	[email protected]
Rear Features	Quad-LED flash, HDR

Selfie Camera

Selfie Sensor(s)
Selfie Features	13 MP

Memory

Storage Capacity	32 GB
RAM (Memory)	3 GB RAM or 16 GB
Card slot	microSD, up to 256 GB

Body

SIM	Dual SIM
Dimensions	142.5 x 72.5 x 8.6 mm (5.61 x 2.85 x 0.34 in)
Weight	–

Comms

WLAN	Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
USB	microUSB 2.0
GPS	Yes, with A-GPS
Bluetooth	4.1, A2DP, LE
Radio	FM radio

Display

Resolution	1080 x 1920 pixels, 16:9 ratio (~424 ppi density)
Type	TFT capacitive touchscreen, 16M colors
Size	5.2 inches, 74.5 cm (~70.3% screen-to-body ratio)
Protection

Features

Sensors

Fingerprint (front-mounted), accelerometer, gyro, proximity, compass

Misc