Tecno Pop 2 firmware stock ROM free download, We have provided all the required download links for drivers, tools, Pop 2 firmware / stockrom, also along with installation steps by steps guide for your ease.
Flashing and installing Smartphone official Stock ROM can help you solve many problem with your Tecno smartphones. If your Device phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem
Tecno Pop 2 Quick Review
Device runs on Android 8.1 (Oreo, Go Edition)
Pop 2 is a 5.5 inches ips touchscreen display with a resolution of 540 x 960 pixels, A size of 153.7 x 72.4 x 9.5 mm (5.66 x 2.85 x 0.37 in)
Powered by Quad-core 1.3 GHz Cortex-A7 processor with 1 GB of RAM. There’s also 8 GB of internal storage which can be expanded up to 32 GB with microSD.
You May Like;
There is a 5-megapixel primary camera with LED Flash and a 8-megapixel pixel front selfie camera.
This is a Dual SIM SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Also support GSM and HSPA networks.
This device is powered with a 2400 mAh Non-removable Li-Ion battery battery
Tecno Pop 2 stock ROM / Firmware
Tecno stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your tecno devices, you’ll always recover your device to normal.
flashing Pop 2 back to stock android is now very easy. This Article is very useful to those that have already bricked their Techno phone or to users that have already installed buggy custom roms on their Smartphone
You may like:
Flashing and installing a stock official rom can help you solve many problem with your Tecno smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem
In addition, tecno stock roms also help in unrooting your tecno devices, just like I said, once you’ve flashed stock roms on your tecno phones, it’ll unbrick your device and you’ll also lose root access from your tecno device.
Importance of Stock Firmware
- Flash Stock ROM to unbrick your Tecno Pop 2
- Flash with Cell Phone Stock ROM to Fix the bootloop issue.
- Upgrade and Downgrade Smartphone
- Unroot or Fix Bugs on your phone
- Fix the lag or stutter on Device
- Revert back to stock firmware will gain device warranty, if under warranty.
- Fix OTA update issues.
DOWNLOAD Pop 2 STOCK ROM
Click the download link below to download Pop 2 StockROM / Firmware
- Device: Tecno Pop 2
- Firmware Version: (firmware version)
- Android: Android 8.1 (Oreo, Go Edition)
- Download: Link
How To Install a Stock/Official Roms For Your Tecno Pop 2
We at PhoneMobs will not be responsible for any damage that might occur to your Cell Phone in case something goes wrong. So, proceed at your own risk. Make sure you are following the guide properly and take a full data backup first.
Download Pop 2 Flash File
Before you begin updating your Smartphone , it is important to have all the flash files / tools at hand:
- Install Tecno USB drivers on your computer, tutorial: Download And Install Tecno USB Drivers
- Download SP Flash Tool for Windows: Download And Install Sp Flash Tool
- Download & extract WiseLink Tool for Windows: Download WiseLink tool to flash all Mediatek Devices
Flash Tecno Pop 2 (Stock ROM Installation)
Here am sharing with you two method of installation Via SP FlashTool and Via WiseLink tool
Update Tecno Pop 2 Stock ROM Via SP FlashTool
- The first thing to do is to Run Flash_tool.exe:
- After that Click on Download Agent, find and locate the download agent File (this file should be in the flash tool folder) and press Open.
- Click on Scatter-loading, find and locate the Firmware Tecno Scatter File and press Open.
- Now click on Download button.
- Connect your Tecno Pop 2
- Turn off your Smartphone first.
- Remove the battery (if removable)
- Remove Sim card and SD card to prevent data loss
- Connect your Cell Phone to your computer via USB cable.
- You ‘ll see the info you Smartphone will display and the flashing process will start immediately:
- The flashing process might take some time to complete.
That’s it ! you have successfully Update Cell Phone Stock Rom.
Update Tecno Pop 2 Stock ROM via WiseLink tool
- First Run WiseLink _Tool.exe and choose No Register Login then click on OK.
- Now click on 3 Dots & browse and locate the Tecno Scatter file you download it. You’ll find it in the folder where you extracted the Tecno Pop 2 ROM files.
- Connect your Pop 2 mobile phone:
- Turn off your Device.
- Remove the battery (if removable)
- Connect your Smartphone to your computer via USB cable.
- Click on Download Button
- The flash process automatically starts, wait for flashing to be complete before disconnecting
- That’s it, a window appears Download finished, your Tecno phone is ready to use