Tecno F3 (Tecno POP 1) firmware stock ROM free download, We have provided all the required download links for drivers, tools, Tecno F3 firmware / stockrom, also along with installation steps by steps guide for your ease.
Flashing and installing Tecno POP 1 official Stock ROM can help you solve many problem with your Tecno smartphones. If your Techno POP 1 phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem
Tecno F3 (Tecno POP 1) Quick Review
Techno POP 1 runs on Android 8.0 Oreo (Go Edition)
Tecno F3 is a 5.7-inch ips touchscreen display with a resolution of 960 X 480 pixels A size of 151.5 x 71.9 x 8.5 mm and weighs about 149g
Powered by Quad-core MediaTek MT6580A, Mali-400 MP2 processor with 1GB of RAM. There’s also 8GB of internal storage which can be expanded up to 32GB with microSD.
You May Like;
- Tecno F3 (Tecno POP 1) Specs and Prices
- Tecno F3 (Tecno POP 1) Hard Reset
- How to Root Tecno F3 (Tecno POP 1)
There is a 5MP camera, 720p [email protected], also features LED dual-tone, Geo-tagging, touch focus, face/smile detection, HDR, Panorama primary camera with LED Flash and a 5MP camera, 480p [email protected] pixel front selfie camera.
This is a Dual Micro Sim SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth v4.0 with A2DP. Other features includes Video Streaming, Active Noise Cancellation, Image Editor also support 3G WCDMA networks.
This device is powered with a 2,400mAh removable Li-ion battery battery
Tecno F3 (Tecno POP 1) stock ROM / Firmware
Tecno stock ROM is an advanced way of factory reset, of course you can’t be able to use hard reset or normal factory reset procedure to unbrick your android device, you’ll always get stuck at bootloop, but once you’ve flashed or installed the recommended stock ROM on your tecno devices, you’ll always recover your device to normal.
flashing Tecno F3 back to stock android is now very easy. This Article is very useful to those that have already bricked their Techno phone or to users that have already installed buggy custom roms on their Tecno POP 1
Flashing and installing a stock official rom can help you solve many problem with your Tecno smartphones. If your phone is malfunctioning, dead, or infected with a virus a simple factory reset might not be able to solve the problem
In addition, tecno stock roms also help in unrooting your tecno devices, just like I said, once you’ve flashed stock roms on your tecno phones, it’ll unbrick your device and you’ll also lose root access from your tecno device.
Importance of Stock Firmware
- Flash Stock ROM to unbrick your Tecno F3 (Tecno POP 1)
- Flash with Tecno F3 Stock ROM to Fix the bootloop issue.
- Upgrade and Downgrade Tecno POP 1
- Unroot or Fix Bugs on your phone
- Fix the lag or stutter on Techno POP 1
- Revert back to stock firmware will gain device warranty, if under warranty.
- Fix OTA update issues.
DOWNLOAD Tecno F3 STOCK ROM
Click the download link below to download Tecno F3 StockROM / Firmware
- Device: Tecno F3 (Tecno POP 1)
- Firmware Version: TECNO-F3-H8022AC-N-180228V73
- Android: Android 8.0 Oreo (Go Edition)
- Download: Link
How To Install a Stock/Official Roms For Your Tecno F3 (Tecno POP 1)
We at PhoneMobs will not be responsible for any damage that might occur to your Tecno F3 in case something goes wrong. So, proceed at your own risk. Make sure you are following the guide properly and take a full data backup first.
Download Tecno F3 Flash File
Before you begin updating your Tecno POP 1, it is important to have all the flash files / tools at hand:
- Install Tecno USB drivers on your computer, tutorial: Download And Install Tecno USB Drivers
- Download SP Flash Tool for Windows: Download And Install Sp Flash Tool
- Download & extract WiseLink Tool for Windows: Download WiseLink tool to flash all Mediatek Devices
Flash Tecno F3 (Tecno POP 1) (Stock ROM Installation)
Here am sharing with you two method of installation Via SP FlashTool and Via WiseLink tool
Update Tecno F3 (Tecno POP 1) Stock ROM Via SP FlashTool
- The first thing to do is to Run Flash_tool.exe:
- After that Click on Download Agent, find and locate the download agent File (this file should be in the flash tool folder) and press Open.
- Click on Scatter-loading, find and locate the Firmware Tecno Scatter File and press Open.
- Now click on Download button.
- Connect your Tecno F3 (Tecno POP 1)
- Turn off your Tecno POP 1 first.
- Remove the battery (if removable)
- Remove Sim card and SD card to prevent data loss
- Connect your Tecno F3 (Tecno POP 1) to your computer via USB cable.
- You ‘ll see the info you Tecno POP 1 will display and the flashing process will start immediately:
- The flashing process might take some time to complete.
That’s it ! you have successfully Update Tecno F3 (Tecno POP 1) Stock Rom.
Update Tecno F3 (Tecno POP 1) Stock ROM via WiseLink tool
- First Run WiseLink _Tool.exe and choose No Register Login then click on OK.
- Now click on 3 Dots & browse and locate the Tecno Scatter file you download it. You’ll find it in the folder where you extracted the Tecno F3 (Tecno POP 1) ROM files.
- Connect your Tecno F3 mobile phone:
- Turn off your Techno POP 1.
- Remove the battery (if removable)
- Connect your Tecno POP 1 to your computer via USB cable.
- Click on Download Button
- The flash process automatically starts, wait for flashing to be complete before disconnecting
- That’s it, a window appears Download finished, your Tecno phone is ready to use